Volume 3, Issue 1 (1-2021)                   sjis 2021, 3(1): 9-20 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Vaze Mobaraki J. Slope Stability Analysis Methods. sjis 2021; 3 (1) :9-20
URL: http://sjis.srpub.org/article-5-85-en.html
M.Sc. Graduated from Birjand University, Iran.
Abstract:   (717 Views)
The presence of discontinuities, the inherent variability of the rock mass and discontinuity properties, and the uncertainties associated with directions and fcof the in-situstress makes the rock engineering problems challenging. The numerical modeling can assist the ground control engineers in designing and evaluating the stability of the excavations. If extensive geological and geotechnical data are available, then detailed predictions of deformation, stress and stability can be accomplished by performing numerical modeling. If not, still the numerical modeling can be used to perform parametric studies to gain insight into the possible ranges of responses of a system due to likely ranges of various parameters. The parametric studies can help to identify the key parameters and their impact on stability of underground excavations. The priorities of the material testing and site investigation can be set based on the selected key parameters from parametric studies. The most important modeling methods in stability analysis include finite element method, finite difference method, boundary element method and Distinct element method, which are used in three static, quasi-static and dynamic conditions and in both definite and probability modes. In this report, we investigate each of these methods their weaknesses and strengths
Full-Text [PDF 512 kb]   (527 Downloads)    
Type of Study: Research | Subject: Computers in Earth Sciences
Received: 2020/10/30 | Accepted: 2021/01/15 | Published: 2021/01/30

1. Ma H, Chi F. Major technologies for safe construction of high earth - Rock Fill Dams. Eng. 2016; 2(4): 498-509. [DOI:10.1016/J.ENG.2016.04.001]
2. Nathi GM, Charyulu TN, Gowtham K, Reddy PS. Coupled structural/thermal analysis of disc brake. Int J Res Eng Tech. 2012; 1(04).
3. Rocscience. Rs2 Tutorial. 2017; https://www.rocscience.com/rocscience/products/rs2
4. Hustrulid W, Kuchta M. Open Pit Mine Planning & Design. London, UK: Talore & Francis Plc. 1998.
5. Zhou F, Zhang J. Dynamic stability analysis of bedding rock slope based on slope displacement information. Technology of High Way and Transport, 2017; 1: 002.
6. Lian B, Wang X. Estimation of Rock Mass Mechanical Parameters of an Open- Pit Mine Slope Based on the Hoek - Brown Criterion and Analysis of Slope Stability. 5th International Conference on Civil, Architectural and Hydraulic Engineering. 2016. [DOI:10.2991/iccahe-16.2016.69]
7. Liu Y, Geo F. Dynamic stability analysis on a slope suppurted by anchor bolts and piles. Elect J Geotech Eng. 2015; 20(7): 1887-1900.
8. Madani H. Tunneling (Volume IV) design and implementation of maintenance system. Tehran: Amirkabir University of Technology Press. 2009; 4.
9. Sherizadeh T. Assessment of roof stability in a room and pillar coal mine in the US using three dimensional distinct element method (Doctor of Philosophy). 2016; http://hdl.handle.net/10150/579111 [DOI:10.1016/j.tust.2016.06.005]
10. Bonolla V, Scholtes L, Donze FV, Elmouttie MK. Rock slope stability analysis using photogrammetric data and DFN-DEM modeling. Acta Geotech. 2015; 10(4): 497-511. [DOI:10.1007/s11440-015-0374-z]
11. Wu YX. Dynamic stability analysis of weathering rock slope by strength reduction method. Elect J Geotech Eng. 2016.
12. Xinrong L, Chunmei H, Xingwang L, Gang L, Bin Z. Study on the safety factors of the bedding rock slope under dynamic loading. J Eng Sci Tech Rev. 2016; 9(3). [DOI:10.25103/jestr.093.25]
13. Krishnamoorthy A. Factor of safety of a slope subjected to seismic load. Elect J Geotech Eng. 2007; 12.
14. Reale C, Xue J, Pan Z, Gavin K. Deterministic and probabilistic multi-modal analysis of slope stability. Comput Geotech. 2015; 6: 172-179. [DOI:10.1016/j.compgeo.2015.01.017]
15. Tschuchnigg F, Schweiger HF, Sloan SW. Slope stability analysis by means of finite element limit analysis and finite element strength reduction techniques. Part 2: Back analysis of a case history. Comput Geotech. 2015; 70: 178-189. [DOI:10.1016/j.compgeo.2015.07.019]
16. Yun L, Jie L. Dynamic stability analysis of rock slope supported by double - Row Piles Based on Hoek - Brown Criterion. Elect J Geotech Eng. 2016.
17. Oh S, Lu N. Slope stability analysis under unsaturated conditions: Case studies of rainfall-induced failure of of cut slopes. Eng Geol. 2015; 184: 96-103. [DOI:10.1016/j.enggeo.2014.11.007]
18. Dai W, Jiang P, Ding J, Fu B. The influence of strength reduction method on slope stability under different instability criteria. DEStech Trans Eng Tech Res. (icaenm). 2017. [DOI:10.12783/dtetr/icaenm2017/7839]
19. Hu J, Feng J, Xu X, Guo F, Yang C. Study on calculation of slope safety factor by strength reduction finite element method. DEStech Trans Eng Tech Res. (icaenm). 2017. [DOI:10.12783/dtetr/icaenm2017/7831]

Add your comments about this article : Your username or Email:

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.