Volume 4, Issue 1 (1-2022)                   sjis 2022, 4(1): 1-8 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

jouyban gharamaleki V, Ghanbari A, Sarbaz Y, Jouyban A, rahimpour E. Development and Validation of a New Automated System for Solubility Determination. sjis 2022; 4 (1) :1-8
URL: http://sjis.srpub.org/article-5-144-en.html
Pharmaceutical Analysis Research Center and Faculty of Pharmacy, Tabriz University of Medical of Sciences, Tabriz, Iran
Abstract:   (137 Views)
Today, the mechanized systems used in the various scientific fields overcome the labor-intensive steps associated with the increasing of the security and decreasing of errors. In the pharmaceutical science, different methods have been developed for mechanizing of the drug solubility determinations. In this study, a new automatic system has been reported for the drug solubility determination. A prototype of the instrument was made and tested for solubility determination of acetaminophen in some aqueous mixtures at various temperatures. According to the mentioned system, this device can determine the saturation point through diluting (an) oversaturated solution using the same solute. Accordingly, a mechanism has been designed to inject the solute to the solution whose volume or amount can be adjusted by the operator. For controlling and setting up the parts of the device, an exclusive software is also offered. The maximum individual percentage deviation for the obtained solubility data in compared with those measured with the conventional methods is 6.4%. The maximum RSD% for the replicated data with the developed device has also been reported to be 3.9%. The developed system was designed by the authors and is therefore entirely novel.
Full-Text [PDF 982 kb]   (41 Downloads)    
Type of Study: Research | Subject: Analysis & Selection of Materials
Received: 2021/11/15 | Accepted: 2022/01/13 | Published: 2022/01/25

1. Di L, Fish PV, Mano T. Bridging solubility between drug discovery and development. Drug Discov Today. 2012; 17(9): 486-95. [DOI:10.1016/j.drudis.2011.11.007] [PMID]
2. Alsenz J, Kansy M. High throughput solubility measurement in drug discovery and development. Adv Drug Deliv Rev. 2007; 59(7): 546-567. [DOI:10.1016/j.addr.2007.05.007] [PMID]
3. Higuchi T, Connors A. Phase-solubility techniques. 1965.
4. Jouyban A. Review of the cosolvency models for predicting solubility of drugs in water-cosolvent mixtures. J Pharm Pharm Sci. 2008; 11(1): 32-58. [DOI:10.18433/J3PP4K] [PMID]
5. Hankinson R, Thompson D. Equilibria and solubility data for the methanol-water-1-nitropropane ternary liquid system. J Chem Eng Data. 1965; 10(1): 18-9. [DOI:10.1021/je60024a007]
6. Ren B-z, Chong H-g, Li W-r, Wang F-a. Solubility of potassium p-chlorophenoxyacetate in ethanol+ water from (295.61 to 358.16) K. J Chem Eng Data. 2005; 50(3): 907-909. [DOI:10.1021/je049611n]
7. Jouyban A, Chew NYK, Chan H-K, Sabour M, Acree Jr WE. A unified cosolvency model for calculating solute solubility in mixed solvents. Chem Pharm Bull. 2005; 53(6): 634-637. [DOI:10.1248/cpb.53.634] [PMID]
8. Jouyban A. Handbook of solubility data for pharmaceuticals Boca Raton (FL) CRC Press. 2010. [DOI:10.1201/9781439804889]
9. Ward HL. The solubility relations of naphthalene. J Phys Chem. 1926; 30(10): 1316-1333. [DOI:10.1021/j150268a003]
10. Yang Z-S, Zeng Z-X, Xue W-L, Zhang Y. Solubility of bis (benzoxazolyl-2-methyl) sulfide in different pure solvents and ethanol+ water binary mixtures between (273.25 and 325.25) K. J Chem Eng Data. 2008; 53(11): 2692-2695. [DOI:10.1021/je8005419]
11. Kong CY, Sone K, Sako T, Funazukuri T, Kagei S. Solubility determination of organometallic complexes in supercritical carbon dioxide by chromatographic impulse response method. Fluid Phas Equil. 2011; 302(1): 347-353. [DOI:10.1016/j.fluid.2010.09.034]
12. Hoelke B, Gieringer S, Arlt M, Saal C. Comparison of nephelometric, UV-spectroscopic, and HPLC methods for high-throughput determination of aqueous drug solubility in microtiter plates. Anal Chem. 2009; 81(8): 3165-3172. [DOI:10.1021/ac9000089] [PMID]
13. Zhao Y, Bao Y, Wang J, Rohani S. In situ focused beam reflectance measurement (FBRM), attenuated total reflectance Fourier transform infrared (ATR-FTIR) and Raman characterization of the polymorphic transformation of carbamazepine. Pharm. 2012; 4(1): 164-178. [DOI:10.3390/pharmaceutics4010164] [PMID] [PMCID]
14. Simone E, Saleemi AN, Nagy ZK. Raman, UV, NIR, and Mid‐IR spectroscopy with focused beam reflectance measurement in monitoring polymorphic transformations. Chem Eng Technol. 2014; 37(8): 1305-1313. [DOI:10.1002/ceat.201400203]
15. Dehring KA, Workman HL, Miller KD, Mandagere A, Poole SK. Automated robotic liquid handling/laser-based nephelometry system for high throughput measurement of kinetic aqueous solubility. J Pharm Biomed Anal. 2004; 36(3): 447-456. [DOI:10.1016/j.jpba.2004.07.022] [PMID]
16. Dinter C, Schuetz A, Blume T, Weinmann H, Harre M, Neh H. Automated solubility determination using a customized robotic system and a turbidity probe. J Assoc Lab Autom. 2005; 10(6): 408-411. [DOI:10.1016/J.JALA.2005.08.006]
17. Wenlock MC, Austin RP, Potter T, Barton P. A highly automated assay for determining the aqueous equilibrium solubility of drug discovery compounds. J Assoc Lab Autom. 2011; 16(4): 276-284. [DOI:10.1016/j.jala.2010.10.002] [PMID]
18. Jouyban-Gharamaleki V, Jouyban-Gharamaleki K, Shayanfar A, Khoubnasabjafari M, Jouyban A. An automated system for determining drug solubility based on laser monitoring technique. J Lab Autom. 2015; 20(1): 3-9. [DOI:10.1177/2211068214554801] [PMID]
19. Jouyban-Gharamaleki V, Jouyban A, Acree WE, Rahimpour E. Smart systems for determination of drug's solubility. Drug Dev Indust Pharm. 2019; 45(2). [DOI:10.1080/03639045.2018.1529786] [PMID]
20. Jiménez JA, Martínez F. Thermodynamic magnitudes of mixing and solvation of acetaminophen in ethanol+ water cosolvent mixtures. Rev Acad Colomb Cienc. 2006; 30(114): 87-99.
21. www.KIPAC2012@Live.com
22. Holman JP. Heat Transfer, 10th Edition, McGraw-Hill Primis, New York, United States, Chapter 2, 2010; 27-66. https://books.google.com/books/about/Heat_transfer.html?id=zCXxKEfI1gEC
23. Budynas RG, Nisbett KJ. Shigley's Mechanical Engineering Design, 8th Edition, McGraw-Hill Primis, New York, United States, Chapter 7, 2008; 402-420. http://www.chegg.com/homework-help/shigley-s-mechanical-engineering-design-8th-edition-solutions-9780073312606

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.